As a CBRE Plumber based in Lebanon, IN on a Monday–Friday first shift schedule, you will play a key role in maintaining the reliability and safety of facility plumbing and mechanical systems.
In this role, you’ll handle a wide range of responsibilities that include preventive maintenance, repairs, testing, installation, and troubleshooting across plumbing, mechanical, and distribution systems. You’ll apply your experience as a licensed plumber while also performing light pipefitting tasks and supporting pipe fitting and welding activities as needed. This position is hands on, service focused, and essential to ensuring that building operations run smoothly and efficiently.
What You’ll Do
Install and maintain house, process and utility plumbing and piping systems, to include vacuum, air, steam, helium, caustic, acetone, nitrogen, chilled water, portable water, purified water, glycol, sanitary piping and waste systems.
Troubleshoot and analyze piping and mechanical failures and make appropriate repairs to minimize downtime.
Make modifications and new installations of piping to include plastic, carbon steel, stainless steel, copper, cast iron and glass. Must read blueprints and have knowledge of all state and local codes.
Provide preventive maintenance on a variety of house, process, and utility equipment systems, to include vacuum, steam, glycol, water, pressure, air, waste and mechanical systems.
Repair, install, replace, test, and troubleshoot the water and medical gas supply and distribution system.
Ensure waste and vent lines are in good operating condition using a plumber’s snake, vacuum plunger, or jet washer.
Interact and communicate effectively to internal, external customers, share knowledge with craftsmen and peers including process, building and design engineers, and scheduler planner.
Qualifications - External
What You’ll Need
High School Diploma, GED, or trade school diploma with 4-5 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered.
Plumbing certification at the Journeyman level required. Medical Gas certification and Backflow certification preferred.
Valid Driver’s License required.
Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.
Ability to exercise judgment based on the analysis of multiple sources of information.
Willingness to take a new perspective on existing solutions.
In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
Organizational skills with an advanced inquisitive mentality.
Why CBRE?
When you join CBRE, you become part of a global leader in commercial real estate and investment services that help businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact! Our collaborative environment is built on our shared values — respect, integrity, service, and excellence — and we value the varied perspectives, backgrounds, and skills of our people. At CBRE, you have the opportunity to chart your own course and realize your full potential!
Disclaimers
Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
Description - Internal
About the Role
As a CBRE Plumber based in Lebanon, IN on a Monday–Friday first shift schedule, you will play a key role in maintaining the reliability and safety of facility plumbing and mechanical systems.
In this role, you’ll handle a wide range of responsibilities that include preventive maintenance, repairs, testing, installation, and troubleshooting across plumbing, mechanical, and distribution systems. You’ll apply your experience as a licensed plumber while also performing light pipefitting tasks and supporting pipe fitting and welding activities as needed. This position is hands on, service focused, and essential to ensuring that building operations run smoothly and efficiently.
What You’ll Do
Install and maintain house, process and utility plumbing and piping systems, to include vacuum, air, steam, helium, caustic, acetone, nitrogen, chilled water, portable water, purified water, glycol, sanitary piping and waste systems.
Troubleshoot and analyze piping and mechanical failures and make appropriate repairs to minimize downtime.
Make modifications and new installations of piping to include plastic, carbon steel, stainless steel, copper, cast iron and glass. Must read blueprints and have knowledge of all state and local codes.
Provide preventive maintenance on a variety of house, process, and utility equipment systems, to include vacuum, steam, glycol, water, pressure, air, waste and mechanical systems.
Repair, install, replace, test, and troubleshoot the water and medical gas supply and distribution system.
Ensure waste and vent lines are in good operating condition using a plumber’s snake, vacuum plunger, or jet washer.
Interact and communicate effectively to internal, external customers, share knowledge with craftsmen and peers including process, building and design engineers, and scheduler planner.
Qualifications - Internal
What You’ll Need
High School Diploma, GED, or trade school diploma with 4-5 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered.
Plumbing certification at the Journeyman level required. Medical Gas certification and Backflow certification preferred.
Valid Driver’s License required.
Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.
Ability to exercise judgment based on the analysis of multiple sources of information.
Willingness to take a new perspective on existing solutions.
In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
Organizational skills with an advanced inquisitive mentality.
Disclaimers
Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
Mar 11, 2026
Full time
As a CBRE Plumber based in Lebanon, IN on a Monday–Friday first shift schedule, you will play a key role in maintaining the reliability and safety of facility plumbing and mechanical systems.
In this role, you’ll handle a wide range of responsibilities that include preventive maintenance, repairs, testing, installation, and troubleshooting across plumbing, mechanical, and distribution systems. You’ll apply your experience as a licensed plumber while also performing light pipefitting tasks and supporting pipe fitting and welding activities as needed. This position is hands on, service focused, and essential to ensuring that building operations run smoothly and efficiently.
What You’ll Do
Install and maintain house, process and utility plumbing and piping systems, to include vacuum, air, steam, helium, caustic, acetone, nitrogen, chilled water, portable water, purified water, glycol, sanitary piping and waste systems.
Troubleshoot and analyze piping and mechanical failures and make appropriate repairs to minimize downtime.
Make modifications and new installations of piping to include plastic, carbon steel, stainless steel, copper, cast iron and glass. Must read blueprints and have knowledge of all state and local codes.
Provide preventive maintenance on a variety of house, process, and utility equipment systems, to include vacuum, steam, glycol, water, pressure, air, waste and mechanical systems.
Repair, install, replace, test, and troubleshoot the water and medical gas supply and distribution system.
Ensure waste and vent lines are in good operating condition using a plumber’s snake, vacuum plunger, or jet washer.
Interact and communicate effectively to internal, external customers, share knowledge with craftsmen and peers including process, building and design engineers, and scheduler planner.
Qualifications - External
What You’ll Need
High School Diploma, GED, or trade school diploma with 4-5 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered.
Plumbing certification at the Journeyman level required. Medical Gas certification and Backflow certification preferred.
Valid Driver’s License required.
Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.
Ability to exercise judgment based on the analysis of multiple sources of information.
Willingness to take a new perspective on existing solutions.
In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
Organizational skills with an advanced inquisitive mentality.
Why CBRE?
When you join CBRE, you become part of a global leader in commercial real estate and investment services that help businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact! Our collaborative environment is built on our shared values — respect, integrity, service, and excellence — and we value the varied perspectives, backgrounds, and skills of our people. At CBRE, you have the opportunity to chart your own course and realize your full potential!
Disclaimers
Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
Description - Internal
About the Role
As a CBRE Plumber based in Lebanon, IN on a Monday–Friday first shift schedule, you will play a key role in maintaining the reliability and safety of facility plumbing and mechanical systems.
In this role, you’ll handle a wide range of responsibilities that include preventive maintenance, repairs, testing, installation, and troubleshooting across plumbing, mechanical, and distribution systems. You’ll apply your experience as a licensed plumber while also performing light pipefitting tasks and supporting pipe fitting and welding activities as needed. This position is hands on, service focused, and essential to ensuring that building operations run smoothly and efficiently.
What You’ll Do
Install and maintain house, process and utility plumbing and piping systems, to include vacuum, air, steam, helium, caustic, acetone, nitrogen, chilled water, portable water, purified water, glycol, sanitary piping and waste systems.
Troubleshoot and analyze piping and mechanical failures and make appropriate repairs to minimize downtime.
Make modifications and new installations of piping to include plastic, carbon steel, stainless steel, copper, cast iron and glass. Must read blueprints and have knowledge of all state and local codes.
Provide preventive maintenance on a variety of house, process, and utility equipment systems, to include vacuum, steam, glycol, water, pressure, air, waste and mechanical systems.
Repair, install, replace, test, and troubleshoot the water and medical gas supply and distribution system.
Ensure waste and vent lines are in good operating condition using a plumber’s snake, vacuum plunger, or jet washer.
Interact and communicate effectively to internal, external customers, share knowledge with craftsmen and peers including process, building and design engineers, and scheduler planner.
Qualifications - Internal
What You’ll Need
High School Diploma, GED, or trade school diploma with 4-5 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered.
Plumbing certification at the Journeyman level required. Medical Gas certification and Backflow certification preferred.
Valid Driver’s License required.
Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.
Ability to exercise judgment based on the analysis of multiple sources of information.
Willingness to take a new perspective on existing solutions.
In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
Organizational skills with an advanced inquisitive mentality.
Disclaimers
Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
As a CBRE Electrician, you will inspect, repair, and maintain mechanical and electrical equipment throughout assigned facilities, focusing on system reliability, safety, and operational continuity in highly regulated spaces. The position plays a key part in keeping critical scientific and production operations running smoothly by maintaining the infrastructure these environments depend on.
This first shift, Monday–Friday role supports a pharmaceutical client by ensuring reliable, compliant, and uninterrupted electrical services across research, laboratory, stability storage, and pilot plant environments.
What You’ll Do
Oversee electrical and lighting systems' general operation, repair, and maintenance. Perform new installations of equipment.
Check, repair, and replace functional components of electrical and lighting systems. This includes valves, motors, controls, switches, gauges, wiring, fans, pumps, compressors, condensers, cores, and pipes.
Assure that equipment is being maintained and operating in a safe manner.
Review historical maintenance records to create proactive inspection, testing, and preventive maintenance schedules.
Operate electrical test equipment—including volt/ohm meters, amp probes, power analyzers, and insulation testers—while following established testing procedures and accurately documenting all results.
Maintain and repair electrical and electronic controls on complex systems, including HVAC equipment, variable speed controllers, lighting systems, and process equipment.
Complete all regulatory training prior to conducting work. Perform all work activities utilizing the appropriate procedures to include GMP/GLP, organizations, department or local requirements. Perform all work utilizing the appropriate environmental regulations and policies. Complete appropriate documentation associated with maintenance activities. Manage individual ITP to ensure compliance.
Qualifications - External
What You’ll Need
High School Diploma, GED, or trade school diploma with 3-4 years of job-related experience. Completion of a formal apprenticeship program preferred. Master Electrician license required as dictated by local electrical codes. Valid Driver's license required.
Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.
In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
Understanding of existing procedures and standards to solve slightly complex problems.
Ability to analyze possible solutions using technical experience to apply appropriate judgment and precedents.
Strong organizational skills with an inquisitive mindset.
Advanced math skills: add, subtract, multiply, divide. Ability to calculate intermediate figures such as percentages discounts and commissions.
Why CBRE?
When you join CBRE, you become part of a global leader in commercial real estate and investment services that help businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact! Our collaborative environment is built on our shared values — respect, integrity, service, and excellence — and we value the varied perspectives, backgrounds, and skills of our people. At CBRE, you have the opportunity to chart your own course and realize your full potential!
Disclaimers
Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
Description - Internal
About the Role
As a CBRE Electrician, you will inspect, repair, and maintain mechanical and electrical equipment throughout assigned facilities, focusing on system reliability, safety, and operational continuity in highly regulated spaces. The position plays a key part in keeping critical scientific and production operations running smoothly by maintaining the infrastructure these environments depend on.
This first shift, Monday–Friday role supports a pharmaceutical client by ensuring reliable, compliant, and uninterrupted electrical services across research, laboratory, stability storage, and pilot plant environments.
What You’ll Do
Oversee electrical and lighting systems' general operation, repair, and maintenance. Perform new installations of equipment.
Check, repair, and replace functional components of electrical and lighting systems. This includes valves, motors, controls, switches, gauges, wiring, fans, pumps, compressors, condensers, cores, and pipes.
Assure that equipment is being maintained and operating in a safe manner.
Review historical maintenance records to create proactive inspection, testing, and preventive maintenance schedules.
Operate electrical test equipment—including volt/ohm meters, amp probes, power analyzers, and insulation testers—while following established testing procedures and accurately documenting all results.
Maintain and repair electrical and electronic controls on complex systems, including HVAC equipment, variable speed controllers, lighting systems, and process equipment.
Complete all regulatory training prior to conducting work. Perform all work activities utilizing the appropriate procedures to include GMP/GLP, organizations, department or local requirements. Perform all work utilizing the appropriate environmental regulations and policies. Complete appropriate documentation associated with maintenance activities. Manage individual ITP to ensure compliance.
Qualifications - Internal
What You’ll Need
High School Diploma, GED, or trade school diploma with 3-4 years of job-related experience. Completion of a formal apprenticeship program preferred. Master Electrician license required as dictated by local electrical codes. Valid Driver's license required.
Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.
In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
Understanding of existing procedures and standards to solve slightly complex problems.
Ability to analyze possible solutions using technical experience to apply appropriate judgment and precedents.
Strong organizational skills with an inquisitive mindset.
Advanced math skills: add, subtract, multiply, divide. Ability to calculate intermediate figures such as percentages discounts and commissions.
Disclaimers
Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
Mar 11, 2026
Full time
As a CBRE Electrician, you will inspect, repair, and maintain mechanical and electrical equipment throughout assigned facilities, focusing on system reliability, safety, and operational continuity in highly regulated spaces. The position plays a key part in keeping critical scientific and production operations running smoothly by maintaining the infrastructure these environments depend on.
This first shift, Monday–Friday role supports a pharmaceutical client by ensuring reliable, compliant, and uninterrupted electrical services across research, laboratory, stability storage, and pilot plant environments.
What You’ll Do
Oversee electrical and lighting systems' general operation, repair, and maintenance. Perform new installations of equipment.
Check, repair, and replace functional components of electrical and lighting systems. This includes valves, motors, controls, switches, gauges, wiring, fans, pumps, compressors, condensers, cores, and pipes.
Assure that equipment is being maintained and operating in a safe manner.
Review historical maintenance records to create proactive inspection, testing, and preventive maintenance schedules.
Operate electrical test equipment—including volt/ohm meters, amp probes, power analyzers, and insulation testers—while following established testing procedures and accurately documenting all results.
Maintain and repair electrical and electronic controls on complex systems, including HVAC equipment, variable speed controllers, lighting systems, and process equipment.
Complete all regulatory training prior to conducting work. Perform all work activities utilizing the appropriate procedures to include GMP/GLP, organizations, department or local requirements. Perform all work utilizing the appropriate environmental regulations and policies. Complete appropriate documentation associated with maintenance activities. Manage individual ITP to ensure compliance.
Qualifications - External
What You’ll Need
High School Diploma, GED, or trade school diploma with 3-4 years of job-related experience. Completion of a formal apprenticeship program preferred. Master Electrician license required as dictated by local electrical codes. Valid Driver's license required.
Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.
In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
Understanding of existing procedures and standards to solve slightly complex problems.
Ability to analyze possible solutions using technical experience to apply appropriate judgment and precedents.
Strong organizational skills with an inquisitive mindset.
Advanced math skills: add, subtract, multiply, divide. Ability to calculate intermediate figures such as percentages discounts and commissions.
Why CBRE?
When you join CBRE, you become part of a global leader in commercial real estate and investment services that help businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact! Our collaborative environment is built on our shared values — respect, integrity, service, and excellence — and we value the varied perspectives, backgrounds, and skills of our people. At CBRE, you have the opportunity to chart your own course and realize your full potential!
Disclaimers
Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
Description - Internal
About the Role
As a CBRE Electrician, you will inspect, repair, and maintain mechanical and electrical equipment throughout assigned facilities, focusing on system reliability, safety, and operational continuity in highly regulated spaces. The position plays a key part in keeping critical scientific and production operations running smoothly by maintaining the infrastructure these environments depend on.
This first shift, Monday–Friday role supports a pharmaceutical client by ensuring reliable, compliant, and uninterrupted electrical services across research, laboratory, stability storage, and pilot plant environments.
What You’ll Do
Oversee electrical and lighting systems' general operation, repair, and maintenance. Perform new installations of equipment.
Check, repair, and replace functional components of electrical and lighting systems. This includes valves, motors, controls, switches, gauges, wiring, fans, pumps, compressors, condensers, cores, and pipes.
Assure that equipment is being maintained and operating in a safe manner.
Review historical maintenance records to create proactive inspection, testing, and preventive maintenance schedules.
Operate electrical test equipment—including volt/ohm meters, amp probes, power analyzers, and insulation testers—while following established testing procedures and accurately documenting all results.
Maintain and repair electrical and electronic controls on complex systems, including HVAC equipment, variable speed controllers, lighting systems, and process equipment.
Complete all regulatory training prior to conducting work. Perform all work activities utilizing the appropriate procedures to include GMP/GLP, organizations, department or local requirements. Perform all work utilizing the appropriate environmental regulations and policies. Complete appropriate documentation associated with maintenance activities. Manage individual ITP to ensure compliance.
Qualifications - Internal
What You’ll Need
High School Diploma, GED, or trade school diploma with 3-4 years of job-related experience. Completion of a formal apprenticeship program preferred. Master Electrician license required as dictated by local electrical codes. Valid Driver's license required.
Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.
In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
Understanding of existing procedures and standards to solve slightly complex problems.
Ability to analyze possible solutions using technical experience to apply appropriate judgment and precedents.
Strong organizational skills with an inquisitive mindset.
Advanced math skills: add, subtract, multiply, divide. Ability to calculate intermediate figures such as percentages discounts and commissions.
Disclaimers
Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
Southern Integrated Solutions and Consulting
Houston, TX 77070, USA
Southern Integrated Solutions and Consulting (SISC) is searching for an Electrical Journeyman. The ideal candidate for this position has a minimum of 3-5 years' electrical experience. The candidate under the general direction of the Companies Project Managers, Superintendents, and Foreman’s will perform electrical, communications and electronic activities. The Electrical Journeyman plays a key role in executing ongoing facilities maintenance and capital improvement projects. The Electrical Journeyman performs and directs the apprentices assigned to them in the daily job duties and tasks and performs other project related duties as required. The Electrical Journeyman position requires physical labor on active job sites and involves working in various environmental conditions. PPE (Personal Protective Equipment) is mandatory on all job sites. If you are a motivated individual who is passionate about technology and enjoys working in a collaborative and fast-paced environment, we encourage you to apply.
Responsibilities:
Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis
Apply basic electrical and construction principles and practices to solve design, development and modification problems with parts, assemblies provided
Fulfill daily commitments and stay on project schedule as directed by job-site foreman
Report project specific information to the assigned superintendent or Foreman on scheduled basis
Ensure the occupational health and safety of assigned employees in accordance with state and federal regulations, departmental and District policies, and industry standards and practices
Inspects work in progress to assure compliance with applicable codes and standards, project specifications, and quality assurance procedures
Keep job site clean before leaving and be kept clutter free during the work
Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits
Measures, cuts, bends, threads, assemble, and installs electrical conduit
Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels
Connects power cables to equipment, such as electric range or motor, and installs grounding leads
Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement
Repairs faulty equipment or systems
Qualifications:
Education & Experience:
High School Graduate or G.E.D
3-5 years' experience in industrial electrical industry
Must possess valid Journeyman Electrician License in either Louisiana or Texas
Valid state motor vehicle operator's license & clear driving record to meet Company policy
Hard Skills:
Experience with using hand-tools and power tools.
Skill or experience reading and interpreting diagrams such as technical drawings or blueprints.
Knowledge of the National Electrical Code published by the National Fire Protection Association (NFPA).
Soft Skills:
Strong communication, problem solving, and critical thinking skills.
High efficiency and time management skills.
Exhibit a willingness to apply oneself, to learn, and to develop electrical skills
Dec 19, 2025
Full time
Southern Integrated Solutions and Consulting (SISC) is searching for an Electrical Journeyman. The ideal candidate for this position has a minimum of 3-5 years' electrical experience. The candidate under the general direction of the Companies Project Managers, Superintendents, and Foreman’s will perform electrical, communications and electronic activities. The Electrical Journeyman plays a key role in executing ongoing facilities maintenance and capital improvement projects. The Electrical Journeyman performs and directs the apprentices assigned to them in the daily job duties and tasks and performs other project related duties as required. The Electrical Journeyman position requires physical labor on active job sites and involves working in various environmental conditions. PPE (Personal Protective Equipment) is mandatory on all job sites. If you are a motivated individual who is passionate about technology and enjoys working in a collaborative and fast-paced environment, we encourage you to apply.
Responsibilities:
Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis
Apply basic electrical and construction principles and practices to solve design, development and modification problems with parts, assemblies provided
Fulfill daily commitments and stay on project schedule as directed by job-site foreman
Report project specific information to the assigned superintendent or Foreman on scheduled basis
Ensure the occupational health and safety of assigned employees in accordance with state and federal regulations, departmental and District policies, and industry standards and practices
Inspects work in progress to assure compliance with applicable codes and standards, project specifications, and quality assurance procedures
Keep job site clean before leaving and be kept clutter free during the work
Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits
Measures, cuts, bends, threads, assemble, and installs electrical conduit
Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels
Connects power cables to equipment, such as electric range or motor, and installs grounding leads
Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement
Repairs faulty equipment or systems
Qualifications:
Education & Experience:
High School Graduate or G.E.D
3-5 years' experience in industrial electrical industry
Must possess valid Journeyman Electrician License in either Louisiana or Texas
Valid state motor vehicle operator's license & clear driving record to meet Company policy
Hard Skills:
Experience with using hand-tools and power tools.
Skill or experience reading and interpreting diagrams such as technical drawings or blueprints.
Knowledge of the National Electrical Code published by the National Fire Protection Association (NFPA).
Soft Skills:
Strong communication, problem solving, and critical thinking skills.
High efficiency and time management skills.
Exhibit a willingness to apply oneself, to learn, and to develop electrical skills
Southern Integrated Solutions and Consulting
Houston, TX 77070, USA
Southern Integrated Solutions and Consulting (SISC) is searching for an experienced and dedicated Electrical Foreman with 10+ years of electrical experience, including a strong background in project leadership. The ideal candidate will hold a valid Journeyman or Master Electrician License in Louisiana or Texas. Reporting to Project Managers and Superintendents, the Electrical Foreman will supervise and coordinate electrical activities on job sites, manage team assignments, and ensure adherence to safety and quality standards. The Electrical Foreman position requires physical labor on active job sites and involves working in various environmental conditions. PPE (Personal Protective Equipment) is mandatory on all job sites. The Electrical Foreman plays a critical role in overseeing project execution, troubleshooting complex issues, and leading a team to complete projects efficiently and safely.
Responsibilities:
Lead and manage a team of electricians and helpers on site, overseeing daily activities and ensuring project tasks are completed accurately and on schedule.
Plan and execute electrical installations, maintenance, and troubleshooting for various facilities maintenance and capital improvement projects.
Coordinate with Project Managers and Superintendents to review all Approved for Construction (AFC) drawings, and specifications to determine work requirements.
Review and interpret blueprints, wiring diagrams, and technical documents, providing guidance to team members as needed.
Install, repair, and maintain power controls, breaker boxes, electrical outlets, light switches, light fixtures, electrical wiring, fuses, and other components of electrical system.
Inspect, isolate, troubleshoot, and repair electrical malfunctions using various test instruments.
Maintain records of project progress, labor, and material usage, and provide regular updates to management.
Ensure compliance with safety regulations, company policies, and industry standards, conducting regular safety checks and enforcing safe work practices.
Collaborate with project managers, engineers, and other stakeholders to ensure efficient workflow.
Inspect and test electrical systems and components to identify and resolve any issues.
Prepare JSA reports, work plans and conduct inspections of worksites and equipment as required.
Train and mentor less experienced electricians and helpers, fostering skill development and promoting a collaborative work environment.
Qualifications:
Education & Experience:
High school diploma or equivalent; technical training in electrical work preferred.
Minimum of 10 years’ experience in electrical work, with at least 3 years in a supervisory role.
Valid Journeyman or Master Electrician License in Louisiana or Texas.
Valid state motor vehicle operator's license & clear driving record to meet Company policy.
Hard Skills:
Strong understanding of electrical systems, including wiring, conduit installation, circuit breakers, and electrical panels.
Proficiency in reading blueprints, schematics, and technical diagrams.
Strong understanding of the National Electrical Code (NEC) and other relevant safety standards.
Experience with electrical testing equipment, troubleshooting, and repair techniques.
Soft Skills:
Excellent organizational and time-management skills with the ability to prioritize and delegate tasks effectively.
Leadership ability with a focus on team development and performance.
Strong problem-solving skills and the ability to troubleshoot electrical systems independently.
Attention to detail and commitment to safety in the workplace.
Familiarity with OSHA regulations and NEC (National Electrical Code) standards.
Dec 19, 2025
Full time
Southern Integrated Solutions and Consulting (SISC) is searching for an experienced and dedicated Electrical Foreman with 10+ years of electrical experience, including a strong background in project leadership. The ideal candidate will hold a valid Journeyman or Master Electrician License in Louisiana or Texas. Reporting to Project Managers and Superintendents, the Electrical Foreman will supervise and coordinate electrical activities on job sites, manage team assignments, and ensure adherence to safety and quality standards. The Electrical Foreman position requires physical labor on active job sites and involves working in various environmental conditions. PPE (Personal Protective Equipment) is mandatory on all job sites. The Electrical Foreman plays a critical role in overseeing project execution, troubleshooting complex issues, and leading a team to complete projects efficiently and safely.
Responsibilities:
Lead and manage a team of electricians and helpers on site, overseeing daily activities and ensuring project tasks are completed accurately and on schedule.
Plan and execute electrical installations, maintenance, and troubleshooting for various facilities maintenance and capital improvement projects.
Coordinate with Project Managers and Superintendents to review all Approved for Construction (AFC) drawings, and specifications to determine work requirements.
Review and interpret blueprints, wiring diagrams, and technical documents, providing guidance to team members as needed.
Install, repair, and maintain power controls, breaker boxes, electrical outlets, light switches, light fixtures, electrical wiring, fuses, and other components of electrical system.
Inspect, isolate, troubleshoot, and repair electrical malfunctions using various test instruments.
Maintain records of project progress, labor, and material usage, and provide regular updates to management.
Ensure compliance with safety regulations, company policies, and industry standards, conducting regular safety checks and enforcing safe work practices.
Collaborate with project managers, engineers, and other stakeholders to ensure efficient workflow.
Inspect and test electrical systems and components to identify and resolve any issues.
Prepare JSA reports, work plans and conduct inspections of worksites and equipment as required.
Train and mentor less experienced electricians and helpers, fostering skill development and promoting a collaborative work environment.
Qualifications:
Education & Experience:
High school diploma or equivalent; technical training in electrical work preferred.
Minimum of 10 years’ experience in electrical work, with at least 3 years in a supervisory role.
Valid Journeyman or Master Electrician License in Louisiana or Texas.
Valid state motor vehicle operator's license & clear driving record to meet Company policy.
Hard Skills:
Strong understanding of electrical systems, including wiring, conduit installation, circuit breakers, and electrical panels.
Proficiency in reading blueprints, schematics, and technical diagrams.
Strong understanding of the National Electrical Code (NEC) and other relevant safety standards.
Experience with electrical testing equipment, troubleshooting, and repair techniques.
Soft Skills:
Excellent organizational and time-management skills with the ability to prioritize and delegate tasks effectively.
Leadership ability with a focus on team development and performance.
Strong problem-solving skills and the ability to troubleshoot electrical systems independently.
Attention to detail and commitment to safety in the workplace.
Familiarity with OSHA regulations and NEC (National Electrical Code) standards.
L.E.B.S. Electrical is looking for a dependable and organized Parts Expediter to support our commercial electrical projects by ensuring the timely delivery and availability of electrical parts, tools, and materials. This role is key to keeping job sites running efficiently by coordinating orders, tracking shipments, and communicating with vendors and field teams. The ideal candidate has a solid understanding of electrical materials, excellent organizational skills, and a proactive approach to problem-solving.
-Key Responsibilities:
* Coordinate the ordering and delivery of electrical parts and materials needed for job sites.
* Work with project managers, foremen, and purchasing to prioritize urgent part needs and delivery schedules.
* Track the status of open orders and follow up with suppliers to ensure on-time delivery.
* Communicate with vendors to resolve delivery issues, shortages, or incorrect shipments.
* Monitor and manage inventory levels at the warehouse and job trailers to prevent shortages or overstocking.
* Ensure that all received items match purchase orders and are delivered to the correct job site or department.
* Assist with returns, warranty claims, or damaged goods processes.
* Maintain accurate documentation of orders, delivery logs, and material transfers.
* Support field crews with part requests and updates on delivery timelines.
* Identify and recommend alternative suppliers or products when needed to avoid delays.
Sep 25, 2025
Full time
L.E.B.S. Electrical is looking for a dependable and organized Parts Expediter to support our commercial electrical projects by ensuring the timely delivery and availability of electrical parts, tools, and materials. This role is key to keeping job sites running efficiently by coordinating orders, tracking shipments, and communicating with vendors and field teams. The ideal candidate has a solid understanding of electrical materials, excellent organizational skills, and a proactive approach to problem-solving.
-Key Responsibilities:
* Coordinate the ordering and delivery of electrical parts and materials needed for job sites.
* Work with project managers, foremen, and purchasing to prioritize urgent part needs and delivery schedules.
* Track the status of open orders and follow up with suppliers to ensure on-time delivery.
* Communicate with vendors to resolve delivery issues, shortages, or incorrect shipments.
* Monitor and manage inventory levels at the warehouse and job trailers to prevent shortages or overstocking.
* Ensure that all received items match purchase orders and are delivered to the correct job site or department.
* Assist with returns, warranty claims, or damaged goods processes.
* Maintain accurate documentation of orders, delivery logs, and material transfers.
* Support field crews with part requests and updates on delivery timelines.
* Identify and recommend alternative suppliers or products when needed to avoid delays.
The Electrician Helper supports licensed electricians by assisting with the installation, maintenance, and repair of electrical systems. This entry-level position provides hands-on experience and exposure to the electrical trade, making it ideal for individuals beginning a career in the skilled trades. Helpers work under close supervision while learning safety practices, tools, materials, and basic electrical concepts.
Key Responsibilities
Assist electricians with installing wiring, conduit, outlets, switches, and light fixtures.
Gather, carry, and organize tools, materials, and equipment on the job site.
Measure, cut, bend, and pull wire as directed.
Drill holes, dig trenches, and perform basic site preparation tasks.
Maintain a clean and safe work environment by following safety procedures and wearing proper protective equipment.
Load and unload supplies and ensure materials are available for daily tasks.
Shadow experienced electricians to gain knowledge of electrical codes, blueprints, and troubleshooting techniques.
Perform other related duties as assigned by the supervising electrician.
Sep 25, 2025
Full time
The Electrician Helper supports licensed electricians by assisting with the installation, maintenance, and repair of electrical systems. This entry-level position provides hands-on experience and exposure to the electrical trade, making it ideal for individuals beginning a career in the skilled trades. Helpers work under close supervision while learning safety practices, tools, materials, and basic electrical concepts.
Key Responsibilities
Assist electricians with installing wiring, conduit, outlets, switches, and light fixtures.
Gather, carry, and organize tools, materials, and equipment on the job site.
Measure, cut, bend, and pull wire as directed.
Drill holes, dig trenches, and perform basic site preparation tasks.
Maintain a clean and safe work environment by following safety procedures and wearing proper protective equipment.
Load and unload supplies and ensure materials are available for daily tasks.
Shadow experienced electricians to gain knowledge of electrical codes, blueprints, and troubleshooting techniques.
Perform other related duties as assigned by the supervising electrician.
Work will consist of installation, alterations, additions and/or repairs of electrical systems conductors and associated materials and equipment within the electrical construction industry.
Responsibilities:
Demonstrates knowledge of conduit bending and wire pulling. Performs routine tasks, installs all sizes of conduit with general supervision. Performs assigned tasks in a safe manner and demonstrates proper care of tools and equipment.
Terminate junction boxes
Pull wire
Install conduit - Branch
Install conduit - Feeder
Underground rough-in work
Meet daily production goals set by field manager or lead foreman.
Maintaining the required list of tools.
Promotional Objectives - Next Level is 2nd Year. You can obtain this level by mastering the above requirements and obtaining the requirements needed for a 2nd Year Apprentice.
Sep 25, 2025
Full time
Work will consist of installation, alterations, additions and/or repairs of electrical systems conductors and associated materials and equipment within the electrical construction industry.
Responsibilities:
Demonstrates knowledge of conduit bending and wire pulling. Performs routine tasks, installs all sizes of conduit with general supervision. Performs assigned tasks in a safe manner and demonstrates proper care of tools and equipment.
Terminate junction boxes
Pull wire
Install conduit - Branch
Install conduit - Feeder
Underground rough-in work
Meet daily production goals set by field manager or lead foreman.
Maintaining the required list of tools.
Promotional Objectives - Next Level is 2nd Year. You can obtain this level by mastering the above requirements and obtaining the requirements needed for a 2nd Year Apprentice.
L.E.B.S Electrical is seeking a motivated and detail-oriented Project Manager to oversee commercial electrical projects. The Project Manager will be responsible for managing budgets, timelines, subcontractors, materials, and client communications to ensure successful project delivery. This role requires a strong understanding of electrical systems, construction schedules, and job site coordination.
Key Responsibilities:
* Plan, coordinate, and manage all aspects of commercial electrical projects from inception to completion.
* Collaborate with estimators, superintendents, and field teams to develop and maintain project schedules.
* Monitor project budgets, change orders, and job costs to ensure profitability.
* Communicate with clients, general contractors, and vendors to maintain strong professional relationships.
* Ensure compliance with safety regulations, building codes, and electrical standards.
* Review and interpret blueprints, technical drawings, and specifications.
* Prepare submittals, RFIs, and project documentation as needed.
* Attend project meetings and provide status updates to stakeholders.
* Resolve project issues promptly to minimize disruptions and maintain progress.
* Coordinate procurement and timely delivery of materials and equipment
Sep 25, 2025
Full time
L.E.B.S Electrical is seeking a motivated and detail-oriented Project Manager to oversee commercial electrical projects. The Project Manager will be responsible for managing budgets, timelines, subcontractors, materials, and client communications to ensure successful project delivery. This role requires a strong understanding of electrical systems, construction schedules, and job site coordination.
Key Responsibilities:
* Plan, coordinate, and manage all aspects of commercial electrical projects from inception to completion.
* Collaborate with estimators, superintendents, and field teams to develop and maintain project schedules.
* Monitor project budgets, change orders, and job costs to ensure profitability.
* Communicate with clients, general contractors, and vendors to maintain strong professional relationships.
* Ensure compliance with safety regulations, building codes, and electrical standards.
* Review and interpret blueprints, technical drawings, and specifications.
* Prepare submittals, RFIs, and project documentation as needed.
* Attend project meetings and provide status updates to stakeholders.
* Resolve project issues promptly to minimize disruptions and maintain progress.
* Coordinate procurement and timely delivery of materials and equipment
L.E.B.S. Electrical is seeking a skilled Electrical Journeyman to install, maintain, and repair electrical systems in commercial buildings and construction sites. The ideal candidate will have extensive experience in conduit bending, panel wiring, blueprint reading, and working with various electrical systems under minimal supervision. This role requires a strong understanding of commercial electrical codes and safety procedures.
Key Responsibilities:
* Install, maintain, and repair wiring, electrical fixtures, and control equipment in commercial buildings (e.g., offices, retail stores, schools, hospitals, warehouses).
* Read and interpret blueprints, electrical schematics, and technical diagrams to determine wiring layouts and connections.
* Perform conduit installation (EMT, RMC, PVC, etc.) and wire pulling according to NEC standards.
* Install and terminate electrical panels, transformers, breakers, switches, lighting systems, and receptacles.
* Troubleshoot and diagnose electrical problems using appropriate testing tools (e.g., multimeters, circuit tracers).
* Ensure all electrical work complies with local, state, and national codes (NEC).
* Work with project managers, site supervisors, and other trades to coordinate installation and meet deadlines.
* Maintain accurate records of work completed, materials used, and hours worked.
* Follow company safety policies and procedures; use PPE and tools properly.
* Mentor and guide apprentices and less experienced electricians on the job site.
* Participate in site inspections and respond to issues identified by inspectors or clients.
Sep 25, 2025
Full time
L.E.B.S. Electrical is seeking a skilled Electrical Journeyman to install, maintain, and repair electrical systems in commercial buildings and construction sites. The ideal candidate will have extensive experience in conduit bending, panel wiring, blueprint reading, and working with various electrical systems under minimal supervision. This role requires a strong understanding of commercial electrical codes and safety procedures.
Key Responsibilities:
* Install, maintain, and repair wiring, electrical fixtures, and control equipment in commercial buildings (e.g., offices, retail stores, schools, hospitals, warehouses).
* Read and interpret blueprints, electrical schematics, and technical diagrams to determine wiring layouts and connections.
* Perform conduit installation (EMT, RMC, PVC, etc.) and wire pulling according to NEC standards.
* Install and terminate electrical panels, transformers, breakers, switches, lighting systems, and receptacles.
* Troubleshoot and diagnose electrical problems using appropriate testing tools (e.g., multimeters, circuit tracers).
* Ensure all electrical work complies with local, state, and national codes (NEC).
* Work with project managers, site supervisors, and other trades to coordinate installation and meet deadlines.
* Maintain accurate records of work completed, materials used, and hours worked.
* Follow company safety policies and procedures; use PPE and tools properly.
* Mentor and guide apprentices and less experienced electricians on the job site.
* Participate in site inspections and respond to issues identified by inspectors or clients.
L.E.B.S. Electrical is seeking an experienced and motivated Electrical Foreman to lead and manage commercial electrical projects from start to finish. The ideal candidate will be responsible for supervising crews, ensuring electrical installations meet all code requirements, coordinating with project stakeholders, and maintaining timelines and budgets. This role requires both technical expertise and strong leadership skills to ensure safe, efficient, and high-quality work.
-Key Responsibilities and Duties:
**Leadership & Supervision**
* Supervise, coordinate, and lead a team of electricians and apprentices on commercial job sites.
* Assign tasks based on worker skill level, project priorities, and job progression.
* Train, mentor, and evaluate team performance to ensure work meets quality and safety standards.
**Project Management**
* Review blueprints, drawings, and project specifications to determine work details and procedures.
* Plan and schedule daily and weekly work activities in coordination with the Project Manager.
* Ensure all work is completed on time and within budget.
**Quality Control**
* Perform regular inspections of work in progress to ensure compliance with NEC, local codes, and project specifications.
* Troubleshoot electrical systems and recommend corrective actions as needed.
* Maintain detailed records of inspections, changes, and completed work.
**Communication & Coordination**
* Serve as the primary on-site point of contact for project managers, general contractors, inspectors, and other trades.
* Participate in job site meetings and provide project status updates.
* Coordinate material deliveries, tool and equipment needs, and manpower requirements.
**Safety Compliance**
* Enforce company and OSHA safety regulations and ensure a safe working environment at all times.
* Conduct regular safety meetings and site audits.
* Report and document any safety incidents or near misses.
**Administrative Duties**
* Maintain daily logs, timecards, material usage reports, and change order documentation.
* Assist in estimating and material take-offs for change orders and small projects.
* Track and report job progress, issues, and delays.
Sep 25, 2025
Full time
L.E.B.S. Electrical is seeking an experienced and motivated Electrical Foreman to lead and manage commercial electrical projects from start to finish. The ideal candidate will be responsible for supervising crews, ensuring electrical installations meet all code requirements, coordinating with project stakeholders, and maintaining timelines and budgets. This role requires both technical expertise and strong leadership skills to ensure safe, efficient, and high-quality work.
-Key Responsibilities and Duties:
**Leadership & Supervision**
* Supervise, coordinate, and lead a team of electricians and apprentices on commercial job sites.
* Assign tasks based on worker skill level, project priorities, and job progression.
* Train, mentor, and evaluate team performance to ensure work meets quality and safety standards.
**Project Management**
* Review blueprints, drawings, and project specifications to determine work details and procedures.
* Plan and schedule daily and weekly work activities in coordination with the Project Manager.
* Ensure all work is completed on time and within budget.
**Quality Control**
* Perform regular inspections of work in progress to ensure compliance with NEC, local codes, and project specifications.
* Troubleshoot electrical systems and recommend corrective actions as needed.
* Maintain detailed records of inspections, changes, and completed work.
**Communication & Coordination**
* Serve as the primary on-site point of contact for project managers, general contractors, inspectors, and other trades.
* Participate in job site meetings and provide project status updates.
* Coordinate material deliveries, tool and equipment needs, and manpower requirements.
**Safety Compliance**
* Enforce company and OSHA safety regulations and ensure a safe working environment at all times.
* Conduct regular safety meetings and site audits.
* Report and document any safety incidents or near misses.
**Administrative Duties**
* Maintain daily logs, timecards, material usage reports, and change order documentation.
* Assist in estimating and material take-offs for change orders and small projects.
* Track and report job progress, issues, and delays.
Clark County Department of Aviation
Harry Reid International Airport (LAS), Wayne Newton Boulevard, Las Vegas, NV 89119, USA
Clark County Department of Aviation
Phone
(702)261-5110
Website
www.harryreidairport.com/careers
SALARY
$30.88 - $45.58 Hourly
LOCATION
Las Vegas, NV
OPENING DATE
03/11/2025
CLOSING DATE
Continuous
ABOUT THE POSITION
The Clark County Department of Aviation is seeking qualified candidates to apply for the Electrician position. This position performs journey-level installation, repair, maintenance, and remodeling of electrical and electronic equipment and facilities and street lighting systems on a variety of Department of Aviation locations. Further, this position ensures that electrical power is available for facilities on an emergency basis. This recruitment will be used to hire for various areas within the Facilities division including, but not limited to, Electrical, Airport Equipment Systems (AES), and Baggage Handling System (BHS).
MINIMUM REQUIREMENTS
Education and Experience:
Equivalent to graduation from high school AND six (6) years of skilled experience in the electrical trade. Successful completion of a recognized apprenticeship as an electrician may be substituted for four (4) years of the required experience. Attendance at a recognized trade school is desirable, as is experience with electronic controls and experience in an industrial or plant setting.
Jul 22, 2025
Full time
Clark County Department of Aviation
Phone
(702)261-5110
Website
www.harryreidairport.com/careers
SALARY
$30.88 - $45.58 Hourly
LOCATION
Las Vegas, NV
OPENING DATE
03/11/2025
CLOSING DATE
Continuous
ABOUT THE POSITION
The Clark County Department of Aviation is seeking qualified candidates to apply for the Electrician position. This position performs journey-level installation, repair, maintenance, and remodeling of electrical and electronic equipment and facilities and street lighting systems on a variety of Department of Aviation locations. Further, this position ensures that electrical power is available for facilities on an emergency basis. This recruitment will be used to hire for various areas within the Facilities division including, but not limited to, Electrical, Airport Equipment Systems (AES), and Baggage Handling System (BHS).
MINIMUM REQUIREMENTS
Education and Experience:
Equivalent to graduation from high school AND six (6) years of skilled experience in the electrical trade. Successful completion of a recognized apprenticeship as an electrician may be substituted for four (4) years of the required experience. Attendance at a recognized trade school is desirable, as is experience with electronic controls and experience in an industrial or plant setting.
Clark County Department of Aviation
Harry Reid International Airport (LAS), Wayne Newton Boulevard, Las Vegas, NV 89119, USA
Clark County Department of Aviation
Phone
(702)261-5110
Website
www.harryreidairport.com/careers
SALARY
$30.88 - $45.58 Hourly
LOCATION
Las Vegas, NV
OPENING DATE
03/11/2025
CLOSING DATE
Continuous
ABOUT THE POSITION
The Clark County Department of Aviation is seeking qualified candidates to apply for the Electrician position. This position performs journey-level installation, repair, maintenance, and remodeling of electrical and electronic equipment and facilities and street lighting systems on a variety of Department of Aviation locations. Further, this position ensures that electrical power is available for facilities on an emergency basis. This recruitment will be used to hire for various areas within the Facilities division including, but not limited to, Electrical, Airport Equipment Systems (AES), and Baggage Handling System (BHS).
MINIMUM REQUIREMENTS
Education and Experience:
Equivalent to graduation from high school AND six (6) years of skilled experience in the electrical trade. Successful completion of a recognized apprenticeship as an electrician may be substituted for four (4) years of the required experience. Attendance at a recognized trade school is desirable, as is experience with electronic controls and experience in an industrial or plant setting.
Jul 22, 2025
Full time
Clark County Department of Aviation
Phone
(702)261-5110
Website
www.harryreidairport.com/careers
SALARY
$30.88 - $45.58 Hourly
LOCATION
Las Vegas, NV
OPENING DATE
03/11/2025
CLOSING DATE
Continuous
ABOUT THE POSITION
The Clark County Department of Aviation is seeking qualified candidates to apply for the Electrician position. This position performs journey-level installation, repair, maintenance, and remodeling of electrical and electronic equipment and facilities and street lighting systems on a variety of Department of Aviation locations. Further, this position ensures that electrical power is available for facilities on an emergency basis. This recruitment will be used to hire for various areas within the Facilities division including, but not limited to, Electrical, Airport Equipment Systems (AES), and Baggage Handling System (BHS).
MINIMUM REQUIREMENTS
Education and Experience:
Equivalent to graduation from high school AND six (6) years of skilled experience in the electrical trade. Successful completion of a recognized apprenticeship as an electrician may be substituted for four (4) years of the required experience. Attendance at a recognized trade school is desirable, as is experience with electronic controls and experience in an industrial or plant setting.
Position Title: Journeyman Electrician
Location: Central Division
Reports to: Superintendent
FLSA Status: Non-Exempt
JOB OBJECTIVE:
Hiring for Senior Level Electricians to work in an industrial setting. We are a full service and installation company for industrial and commercial customers. We are looking for a Senior-level Journeyman Electrician with the knowledge, experience, and motivation to perform service with quality workmanship and excellent customer service. We value our employees which is why we value a positive team attitude that benefits the success of the company with communication, professionalism and respect.
EXPERIENCE:
Must have 5+ years’ experience as an Industrial Electrician or above.
Must have all the required tools.
Must be willing and able to follow all instructed safety regulations.
Must have a valid Driver's License.
Must pass drug and background check.
KNOWLEDGE:
Must be able to read blueprints and schematics proficiently to perform duties.
Must be able to demonstrate former knowledge and experience working on high voltage systems.
Must know basic electrical theory for example but not limited to ohms law.
Must be able to install and modify cable tray using hand tools and power tools.
Must be able to bend and cut conduit using hand saws, hand tube bending equipment as well as power and hydraulic cutting and tube bending devices.
Must be proficient in cable pulling methods used to run cable through specified pathways.
Must be able to use specialized electrical tools such as ohm meters, multi-meters, and terminating devices.
Must be able to terminate both High and low voltage equipment and cable/wiring.
Must have mechanical and electrical knowledge of components relative to a Combined Cycle Power Plant.
Must be able to trouble shoot equipment and systems for electrical malfunctions.
Must be able to identify several types, gauges, and color of cables and wires.
Must be reliable, accountable, and consistent in performing administrative processes.
Must be able to illustrate knowledge and experience of working with a lock out tag out system.
EDUCATION:
High School Diploma or Equivalent
NCCER and a State Electrical License (TDLR)
TWIC Card Preferred
PHYSICAL REQUIREMENTS:
Required to adhere to large amounts of standing, walking, bending, squatting, sitting, and lifting.
Will talk and hear to communicate.
Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls, and tools.
May be required to pick up, lift, carry and move up to 50lbs.
Will work at heights, climb ladders and stairways, and may occasionally work on platforms and/or scaffolding using the appropriate fall protection requirements.
Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE.
Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots.
U . S . On l y: Au t ho r ization to work lawfully in the US without spo n sorship from Norrell Const r uc ti on is required . No rr ell Cons t ruct i on , Inc is an equal opport u nity employe r . All qualified applicants will r ecei v e considera ti on for employme n t without rega r d to race, color , religio n , sex, sexual orientat i on, gender i dentity , marit al st a tus , n at iona l orig i n , disability , vet er an s t at us , or a n y othe r bas i s protected by applicable federal , state, or loca l law .
Jul 08, 2025
Full time
Position Title: Journeyman Electrician
Location: Central Division
Reports to: Superintendent
FLSA Status: Non-Exempt
JOB OBJECTIVE:
Hiring for Senior Level Electricians to work in an industrial setting. We are a full service and installation company for industrial and commercial customers. We are looking for a Senior-level Journeyman Electrician with the knowledge, experience, and motivation to perform service with quality workmanship and excellent customer service. We value our employees which is why we value a positive team attitude that benefits the success of the company with communication, professionalism and respect.
EXPERIENCE:
Must have 5+ years’ experience as an Industrial Electrician or above.
Must have all the required tools.
Must be willing and able to follow all instructed safety regulations.
Must have a valid Driver's License.
Must pass drug and background check.
KNOWLEDGE:
Must be able to read blueprints and schematics proficiently to perform duties.
Must be able to demonstrate former knowledge and experience working on high voltage systems.
Must know basic electrical theory for example but not limited to ohms law.
Must be able to install and modify cable tray using hand tools and power tools.
Must be able to bend and cut conduit using hand saws, hand tube bending equipment as well as power and hydraulic cutting and tube bending devices.
Must be proficient in cable pulling methods used to run cable through specified pathways.
Must be able to use specialized electrical tools such as ohm meters, multi-meters, and terminating devices.
Must be able to terminate both High and low voltage equipment and cable/wiring.
Must have mechanical and electrical knowledge of components relative to a Combined Cycle Power Plant.
Must be able to trouble shoot equipment and systems for electrical malfunctions.
Must be able to identify several types, gauges, and color of cables and wires.
Must be reliable, accountable, and consistent in performing administrative processes.
Must be able to illustrate knowledge and experience of working with a lock out tag out system.
EDUCATION:
High School Diploma or Equivalent
NCCER and a State Electrical License (TDLR)
TWIC Card Preferred
PHYSICAL REQUIREMENTS:
Required to adhere to large amounts of standing, walking, bending, squatting, sitting, and lifting.
Will talk and hear to communicate.
Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls, and tools.
May be required to pick up, lift, carry and move up to 50lbs.
Will work at heights, climb ladders and stairways, and may occasionally work on platforms and/or scaffolding using the appropriate fall protection requirements.
Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE.
Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots.
U . S . On l y: Au t ho r ization to work lawfully in the US without spo n sorship from Norrell Const r uc ti on is required . No rr ell Cons t ruct i on , Inc is an equal opport u nity employe r . All qualified applicants will r ecei v e considera ti on for employme n t without rega r d to race, color , religio n , sex, sexual orientat i on, gender i dentity , marit al st a tus , n at iona l orig i n , disability , vet er an s t at us , or a n y othe r bas i s protected by applicable federal , state, or loca l law .
Electrician-Position: Electrician
Shift: 4 x4 shifts: 6:45am – 7pm or 6:45pm – 7am
Pay Rate: $38.38 - $41.45 plus $2,000 sign-on bonus and $5,000 relocation assistance
Location: Columbus, Ohio
From a small family business to a multi-billion-dollar global company, Sonoco has been changing
the face of products and packaging since 1899 — all while keeping the heart of “People Build
Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the
Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging
solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of
brands, our achievements in sustainability and industrialization and the groundbreaking work
accomplished by our people.
While reporting to the Senior Engineer, as an Electrician, you will performs tasks and provides
services to support the plant’s overall business plans and objectives as directed
What You’ll Be Doing:
• Complies with established job safety practices, policies and procedures as specified in
plant and corporate directives for the safe performance of the work assignment.
• Supports and follows the SQF (Safe Quality Food) guidelines of the food safety system.
• Responsible for maintaining a safe and secure work environment. This includes correcting
unsafe acts/conditions, participating in monthly safety meetings, performing monthly
safety inspections, and investigating accidents, as required.
• Follows company policies, Standard Operating Procedures (SOP), practices and Sonoco’s
Global Code of Conduct.
• Install all electrical segments in such equipment as gas mixers, burners, de-ionized water
units, air compressors, plant air circulation systems, cooling and heating units, ultra sonic
cleaners, waxers and plant lighting.
• Troubleshoot, adjust and repairs all electrical equipment, solid state circuits, circuit
boards, components, logic boards, transducers, amplifiers, and complex timing and
inspection devices.
• Perform preventative maintenance on assigned electrical systems and equipment.
• Identify inefficiencies and potential electrical problems and coordinates through supervisor
to resolve.
• Program logic controls (PLC) for proper equipment operation.
• Supplies and maintains required hand tools.
• May assist in the design, experimentation, and/or installation of all plant equipment or
electrical production procedures.
• Other duties as assigned.
We’d love to hear from you if:
• Experience with PLC programming & troubleshooting, HMI and industrial electrical
networking.
• Working knowledge of the following areas: all assigned equipment, multimeter, solid state
circuitry, electronics, electrical-mechanical devices, transmission systems, interface
units, AC/DC motors, high-voltage motors, wiring diagrams and schematics, Signode
strapper, video jet, Allen Bradley and Siemen's PLC's, computers, and inspection and
digital devices.
• Knowledge of hazardous material handling, working in confined spaces and other safety
practices, and basic knowledge of national electrical code (NEC).
• Thorough understanding of the operating principles of all assigned equipment, i.e.,
electrical test equipment, hand tools, etc. and the ability to use logic to troubleshoot
equipment.
• Interpersonal and communication skills needed.
Production and Maintenance Technician-Production and Maintenance Technician: ($2000 hiring
Bonus)
Location: Columbus, OH
Salary: $32.14
Schedule: must be open to rotating 4 on 4 off shifts; 6:45AM – 7PM or 6:45PM – 7AM;
From a small family business to a multi-billion dollar global company, Sonoco has been changing
the face of products and packaging since 1899 — all while keeping the heart of “People Build
Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the
Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging
solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of
brands, our achievements in sustainability and industrialization and the groundbreaking work
accomplished by our people.
What You’ll Be Doing:
• Perform various manual or mechanical production functions by operating, adjusting, and
repairing the production equipment to meet customer specifications.
• Disassemble, overhaul, and rebuild production equipment.
• Perform troubleshooting on production equipment as required.
• Perform preventative maintenance on production equipment as required.
• Conduct inspection of in-process materials and in-process and finished product.
• Responsible for replenishing supplies, materials, parts, and tooling required for assigned
area.
• Access, input, and retrieve information from the computer.
• Communicate pertinent information to next shift.
• Supply and maintain required hand tools.
• Complete clean-up, painting, and housekeeping duties.
• Rotate through all workstations as needed.
We’d love to hear from you if:
• You have previous manufacturing experience and/or training or combination of both (3
years)
• Read and comprehend standard work instructions
• Arrive to work on time with a strong attendance record
• An individual looking to advance with a high school diploma or GED
Production Associate III-Position: Production Associate III
Location: Columbus, OH
Salary: $27.93
Schedule: must be open to rotating 4 on 4 off shifts; 6:45AM – 7PM or 6:45PM – 7AM;
From a small family business to a multi-billion dollar global company, Sonoco has been changing
the face of products and packaging since 1899 — all while keeping the heart of “People Build
Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the
Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging
solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of
brands, our achievements in sustainability and industrialization and the groundbreaking work
accomplished by our people.
What You’ll Be Doing:
• Inspects product throughout the shift and notifies shift production lead and quality
technician of any quality defects through both visual inspection and several detailed quality
inspection procedures.
• Responsible for keeping work area and machinery clean and safe.
• Enters production and quality information into production software.
• Communicates pertinent information to next shift.
• Performs clean-up, painting, and housekeeping duties.
• Establishes and maintains effective work relationships within the department, the division,
the group, and the company. Includes ability to handle stress and to interact with others so
as to establish and maintain a positive and productive work environment and minimize
personal conflicts. Participates in teams and work groups with goal of continuous
improvement.
• Complies with established job safety practices, policies, and procedures as specified in
plant and corporate directives for the safe performance of the work assignment.
• Supports and follows the guidelines of the food safety system.
• Stages and maintains packaging materials and follows correct packaging/banding
procedures.
• Performs and assists in maintaining production equipment as required.
• Provides on-the-job training of assigned personnel.
• Conducts inspection of in process materials and in process finished products.
• Responsible for replenishing supplies and materials required for assigned area
We’d love to hear from you if:
• You have previous manufacturing experience and/or training (2+ years)
• Read and comprehend standard work instructions
• Arrive to work on time with a strong attendance record
• An individual looking to advance with a high school diploma or GED
Engineer - Emerging Leaders Program - Metal Packaging Division-
The Sonoco Emerging Leaders Program (ELP) is designed to help you develop leadership skills, gain
technical knowledge, establish strong business skills and understand Sonoco’s culture and
processes. The program is a blend of hands-on experiences and opportunities. Throughout the
program you can expect to gain a better understanding of your leadership style and contribute to
Sonoco through valuable project work.
Sonoco is a very diversified company. We have 18 business units and most are looking to hire,
including; Rigid Paper & Closures, Global Plastics, Flexibles, Paper, Recycling, Consumer
Technology/R&D, Tubes & Cores, and more! Whichever business unit you join, you can expect a
tailored experience!
Your time spent in the ELP will cover specific core objectives as follows (but not limited to):
• Technical Skills Training - Safety, Quality, Scheduling, Customer satisfaction
• Leadership Training – Supervisory skills, Performance Management, Mentorship
• Business Insights - Accountability, Execution, Risk Taking, Budgeting
• Culture Integration – including Communication, Collaboration and Innovation
Our hope is that in time, you’ll be a business leader! Whether that means you become a Plant
Manager, Director of Finance, Supply Chain Leader, Regional Manufacturing Director, etc., the
opportunities are endless.
We want employees who can help us live our purpose each and every day. Our core belief is the
People Build Businesses, by ‘Doing the Right Thing’. To become a member of the ELP you must
have strong ethics, a passion for innovation, and be willing to go the extra mile.
We look for students who:
• Have or will obtain a Bachelor or Master’s degree in Industrial Engineering or Mechanical
Engineering by December 2024 or May 2025.
• Previous internship experience (preferably in Manufacturing or functional area)
• Proven leadership experience
• Desire to work in a Manufacturing environment
• Technical aptitude
• Strong communication, presentation, and interpersonal skills
This position will be located at our Columbus Operating Center in Columbus, Ohio.
All ELP Associates must be open to relocation (immediately or in the future), and be willing to work
rotating or late shifts.
Although these positions are listed in specific locations, candidates will be matched based off their
unique experiences and the specific location needs. We ask that our Emerging Leader and Interns
remain flexible in their location preferences.
Compensation:
The annual base salary range for this position is $65,000 - $82,500
Jun 20, 2025
Full time
Electrician-Position: Electrician
Shift: 4 x4 shifts: 6:45am – 7pm or 6:45pm – 7am
Pay Rate: $38.38 - $41.45 plus $2,000 sign-on bonus and $5,000 relocation assistance
Location: Columbus, Ohio
From a small family business to a multi-billion-dollar global company, Sonoco has been changing
the face of products and packaging since 1899 — all while keeping the heart of “People Build
Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the
Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging
solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of
brands, our achievements in sustainability and industrialization and the groundbreaking work
accomplished by our people.
While reporting to the Senior Engineer, as an Electrician, you will performs tasks and provides
services to support the plant’s overall business plans and objectives as directed
What You’ll Be Doing:
• Complies with established job safety practices, policies and procedures as specified in
plant and corporate directives for the safe performance of the work assignment.
• Supports and follows the SQF (Safe Quality Food) guidelines of the food safety system.
• Responsible for maintaining a safe and secure work environment. This includes correcting
unsafe acts/conditions, participating in monthly safety meetings, performing monthly
safety inspections, and investigating accidents, as required.
• Follows company policies, Standard Operating Procedures (SOP), practices and Sonoco’s
Global Code of Conduct.
• Install all electrical segments in such equipment as gas mixers, burners, de-ionized water
units, air compressors, plant air circulation systems, cooling and heating units, ultra sonic
cleaners, waxers and plant lighting.
• Troubleshoot, adjust and repairs all electrical equipment, solid state circuits, circuit
boards, components, logic boards, transducers, amplifiers, and complex timing and
inspection devices.
• Perform preventative maintenance on assigned electrical systems and equipment.
• Identify inefficiencies and potential electrical problems and coordinates through supervisor
to resolve.
• Program logic controls (PLC) for proper equipment operation.
• Supplies and maintains required hand tools.
• May assist in the design, experimentation, and/or installation of all plant equipment or
electrical production procedures.
• Other duties as assigned.
We’d love to hear from you if:
• Experience with PLC programming & troubleshooting, HMI and industrial electrical
networking.
• Working knowledge of the following areas: all assigned equipment, multimeter, solid state
circuitry, electronics, electrical-mechanical devices, transmission systems, interface
units, AC/DC motors, high-voltage motors, wiring diagrams and schematics, Signode
strapper, video jet, Allen Bradley and Siemen's PLC's, computers, and inspection and
digital devices.
• Knowledge of hazardous material handling, working in confined spaces and other safety
practices, and basic knowledge of national electrical code (NEC).
• Thorough understanding of the operating principles of all assigned equipment, i.e.,
electrical test equipment, hand tools, etc. and the ability to use logic to troubleshoot
equipment.
• Interpersonal and communication skills needed.
Production and Maintenance Technician-Production and Maintenance Technician: ($2000 hiring
Bonus)
Location: Columbus, OH
Salary: $32.14
Schedule: must be open to rotating 4 on 4 off shifts; 6:45AM – 7PM or 6:45PM – 7AM;
From a small family business to a multi-billion dollar global company, Sonoco has been changing
the face of products and packaging since 1899 — all while keeping the heart of “People Build
Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the
Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging
solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of
brands, our achievements in sustainability and industrialization and the groundbreaking work
accomplished by our people.
What You’ll Be Doing:
• Perform various manual or mechanical production functions by operating, adjusting, and
repairing the production equipment to meet customer specifications.
• Disassemble, overhaul, and rebuild production equipment.
• Perform troubleshooting on production equipment as required.
• Perform preventative maintenance on production equipment as required.
• Conduct inspection of in-process materials and in-process and finished product.
• Responsible for replenishing supplies, materials, parts, and tooling required for assigned
area.
• Access, input, and retrieve information from the computer.
• Communicate pertinent information to next shift.
• Supply and maintain required hand tools.
• Complete clean-up, painting, and housekeeping duties.
• Rotate through all workstations as needed.
We’d love to hear from you if:
• You have previous manufacturing experience and/or training or combination of both (3
years)
• Read and comprehend standard work instructions
• Arrive to work on time with a strong attendance record
• An individual looking to advance with a high school diploma or GED
Production Associate III-Position: Production Associate III
Location: Columbus, OH
Salary: $27.93
Schedule: must be open to rotating 4 on 4 off shifts; 6:45AM – 7PM or 6:45PM – 7AM;
From a small family business to a multi-billion dollar global company, Sonoco has been changing
the face of products and packaging since 1899 — all while keeping the heart of “People Build
Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the
Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging
solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of
brands, our achievements in sustainability and industrialization and the groundbreaking work
accomplished by our people.
What You’ll Be Doing:
• Inspects product throughout the shift and notifies shift production lead and quality
technician of any quality defects through both visual inspection and several detailed quality
inspection procedures.
• Responsible for keeping work area and machinery clean and safe.
• Enters production and quality information into production software.
• Communicates pertinent information to next shift.
• Performs clean-up, painting, and housekeeping duties.
• Establishes and maintains effective work relationships within the department, the division,
the group, and the company. Includes ability to handle stress and to interact with others so
as to establish and maintain a positive and productive work environment and minimize
personal conflicts. Participates in teams and work groups with goal of continuous
improvement.
• Complies with established job safety practices, policies, and procedures as specified in
plant and corporate directives for the safe performance of the work assignment.
• Supports and follows the guidelines of the food safety system.
• Stages and maintains packaging materials and follows correct packaging/banding
procedures.
• Performs and assists in maintaining production equipment as required.
• Provides on-the-job training of assigned personnel.
• Conducts inspection of in process materials and in process finished products.
• Responsible for replenishing supplies and materials required for assigned area
We’d love to hear from you if:
• You have previous manufacturing experience and/or training (2+ years)
• Read and comprehend standard work instructions
• Arrive to work on time with a strong attendance record
• An individual looking to advance with a high school diploma or GED
Engineer - Emerging Leaders Program - Metal Packaging Division-
The Sonoco Emerging Leaders Program (ELP) is designed to help you develop leadership skills, gain
technical knowledge, establish strong business skills and understand Sonoco’s culture and
processes. The program is a blend of hands-on experiences and opportunities. Throughout the
program you can expect to gain a better understanding of your leadership style and contribute to
Sonoco through valuable project work.
Sonoco is a very diversified company. We have 18 business units and most are looking to hire,
including; Rigid Paper & Closures, Global Plastics, Flexibles, Paper, Recycling, Consumer
Technology/R&D, Tubes & Cores, and more! Whichever business unit you join, you can expect a
tailored experience!
Your time spent in the ELP will cover specific core objectives as follows (but not limited to):
• Technical Skills Training - Safety, Quality, Scheduling, Customer satisfaction
• Leadership Training – Supervisory skills, Performance Management, Mentorship
• Business Insights - Accountability, Execution, Risk Taking, Budgeting
• Culture Integration – including Communication, Collaboration and Innovation
Our hope is that in time, you’ll be a business leader! Whether that means you become a Plant
Manager, Director of Finance, Supply Chain Leader, Regional Manufacturing Director, etc., the
opportunities are endless.
We want employees who can help us live our purpose each and every day. Our core belief is the
People Build Businesses, by ‘Doing the Right Thing’. To become a member of the ELP you must
have strong ethics, a passion for innovation, and be willing to go the extra mile.
We look for students who:
• Have or will obtain a Bachelor or Master’s degree in Industrial Engineering or Mechanical
Engineering by December 2024 or May 2025.
• Previous internship experience (preferably in Manufacturing or functional area)
• Proven leadership experience
• Desire to work in a Manufacturing environment
• Technical aptitude
• Strong communication, presentation, and interpersonal skills
This position will be located at our Columbus Operating Center in Columbus, Ohio.
All ELP Associates must be open to relocation (immediately or in the future), and be willing to work
rotating or late shifts.
Although these positions are listed in specific locations, candidates will be matched based off their
unique experiences and the specific location needs. We ask that our Emerging Leader and Interns
remain flexible in their location preferences.
Compensation:
The annual base salary range for this position is $65,000 - $82,500
Oldcastle APG, a CRH Company, is the leading provider of outdoor living solutions in North America with an award-winning portfolio that enables customers to Live Well Outside. Inspiring endless possibilities with enduring performance, its collection of premier building products create inviting outdoor spaces where people connect, reflect and recharge. The manufacturer's signature brands include Belgard® and Echelon® hardscape and masonry materials; Barrette Outdoor Living® and MoistureShield® fencing, decking and railing; Sakrete® and Amerimix® packaged concrete and mortar; Techniseal® sands, jointing technologies and surface protectors; PebbleTec® pool finishes; plus popular brands of landscape and gardening materials.
Job Summary
This role is responsible for ensuring proper electrical functioning of plant equipment, tools, and machinery and to troubleshoot any electrical malfunctioning, and complete appropriate repairs and maintenance. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential duties of the job.
Job Responsibilities
Install, adjust, and repair production equipment and special purpose machines as assigned
Operate a variety of hand and power tools to repair, grease, weld, cut, change parts, and complete tasks as assigned
Weld and use cutting torch as required
Perform general repairs to plant structures
Test and troubleshoot malfunctioning machinery, determine repairs and discuss with head mechanic for approval and repair as needed
Replace faulty parts, electrical wires, motors, controls, and circuit boards
Install equipment and electrical components and test to ensure proper functioning
Maintain and repair all existing electrical equipment in the production areas
Install power supply wiring and conduit for newly installed machines and equipment
Read blueprints, wiring diagrams, process sheets, and assembly schematic drawings
Calibrate and adjust all electrical/electronic equipment according to manufacturer's specifications
Do minor programming and maintenance for programmable logic controller based equipment
Dismantle equipment to gain access to and remove defective parts using hoists, cranes, hand tools, and power tools
Lubricate and clean parts and equipment to ensure proper operation
Job Requirements
Associate's degree or completion of Technical School and Apprenticeship program or equivalent in training, experience, and education
At least 5 years of industrial experience in electrical support and maintenance functions
Must have been employed as an electrician or electrician apprentice within the past 18 months
Must be knowledgeable of OSHA safety requirements, especially those related to electrical operations and components
Knowledge of hydraulics, mechanics, electricity, carpentry, or related field preferred
Ability to read and understand electrical schematics and blueprints
Working knowledge of three-phase motors, programmable controls, circuits, and National Electrical Code
Ability to lift, push or pull up to 50 lbs.
Ability to use tools and equipment to repair and provide maintenance while standing, crouching, stretching, extending extremities and under extreme work environments
What CRH Offers You
Highly competitive base pay
Comprehensive medical, dental and disability benefits programs
Group retirement savings program
Health and wellness programs
A diverse and inclusive culture that values opportunity for growth, development, and internal promotion
About CRH
CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.
If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!
Oldcastle APG, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability--If you want to know more, please click on this link.
Nov 15, 2024
Full time
Oldcastle APG, a CRH Company, is the leading provider of outdoor living solutions in North America with an award-winning portfolio that enables customers to Live Well Outside. Inspiring endless possibilities with enduring performance, its collection of premier building products create inviting outdoor spaces where people connect, reflect and recharge. The manufacturer's signature brands include Belgard® and Echelon® hardscape and masonry materials; Barrette Outdoor Living® and MoistureShield® fencing, decking and railing; Sakrete® and Amerimix® packaged concrete and mortar; Techniseal® sands, jointing technologies and surface protectors; PebbleTec® pool finishes; plus popular brands of landscape and gardening materials.
Job Summary
This role is responsible for ensuring proper electrical functioning of plant equipment, tools, and machinery and to troubleshoot any electrical malfunctioning, and complete appropriate repairs and maintenance. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential duties of the job.
Job Responsibilities
Install, adjust, and repair production equipment and special purpose machines as assigned
Operate a variety of hand and power tools to repair, grease, weld, cut, change parts, and complete tasks as assigned
Weld and use cutting torch as required
Perform general repairs to plant structures
Test and troubleshoot malfunctioning machinery, determine repairs and discuss with head mechanic for approval and repair as needed
Replace faulty parts, electrical wires, motors, controls, and circuit boards
Install equipment and electrical components and test to ensure proper functioning
Maintain and repair all existing electrical equipment in the production areas
Install power supply wiring and conduit for newly installed machines and equipment
Read blueprints, wiring diagrams, process sheets, and assembly schematic drawings
Calibrate and adjust all electrical/electronic equipment according to manufacturer's specifications
Do minor programming and maintenance for programmable logic controller based equipment
Dismantle equipment to gain access to and remove defective parts using hoists, cranes, hand tools, and power tools
Lubricate and clean parts and equipment to ensure proper operation
Job Requirements
Associate's degree or completion of Technical School and Apprenticeship program or equivalent in training, experience, and education
At least 5 years of industrial experience in electrical support and maintenance functions
Must have been employed as an electrician or electrician apprentice within the past 18 months
Must be knowledgeable of OSHA safety requirements, especially those related to electrical operations and components
Knowledge of hydraulics, mechanics, electricity, carpentry, or related field preferred
Ability to read and understand electrical schematics and blueprints
Working knowledge of three-phase motors, programmable controls, circuits, and National Electrical Code
Ability to lift, push or pull up to 50 lbs.
Ability to use tools and equipment to repair and provide maintenance while standing, crouching, stretching, extending extremities and under extreme work environments
What CRH Offers You
Highly competitive base pay
Comprehensive medical, dental and disability benefits programs
Group retirement savings program
Health and wellness programs
A diverse and inclusive culture that values opportunity for growth, development, and internal promotion
About CRH
CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.
If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!
Oldcastle APG, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability--If you want to know more, please click on this link.
